China External Circuit Breaker Manufacturer, Supplier, Factory

◆ Use Conditions of ZW32-40.5 Outdoor HV Vacuum Circuit Breaker
1.Ambient temperature: -30℃~+60℃;
2.Altitude: ≤3000m;
3.Wind speed: ≤34m/s;
4.Pollution grade: ≤IV.
5.Storage temperature: -40℃~+85℃.

XUCKY Electric brand's VEF-12GD Side Installation Type 3 Working Position Vacuum Circuit Breaker Integrated, side installation, with disconnect switch, with earth switch (upper/lower earthing), interlocking mechanism integrated miniaturized
● 12KV, 630~1250A, 20~31.5KA
● For cabinet width 500mm
● Patented technology
● Solid sealing technology
● Outgoing terminal with non-contact charged display sensor
● The cabinet door block adjustment free

Q3 Automatic Transfer Switch (hereinafter referred to as ATS), it is suitable for the power supply system of AC 50Hz, rated voltag f 400V, rated current of 63A and below. Choice and conversion between two power supply according to the needs. ATS have protection functions of overload, short circuit, under-voltage, but also have functions of fire, double breaking and output closing signal. Particularly applicable to the lighting lines in office buildings, shopping malls, banks, high-rise buildings and other places with needs of the fire.

Wholesale LR9 thermal overload relay manufacturer, 32A/690V, thermal setting range 6.4-32A, selectable tripping class 5-10-20-30, for protection of 3-phase motors 3-15KW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, buttons for test, stop and reset as well as manual-automatic reset selector, dipswitches for tripping class selection, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. With a large thermal setting range 6.4-32A, a selectable tripping class 5-10-20-30 and phase unbalance detection, it protects motors 3 to 11KW@400V. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D09-D38. Mounting on DIN rail or screw fixing, separated from contactor, with use of the terminal block LAD7B205 (to be ordered separately). Multi-standards certified (IEC, UL, CSA, CCC), Green Premium compliant (RoHs/Reach).

High quality customized products FN7-24 Indoor HV Load Break Switch applies to three-phase powersupply system of rated voltage 12/24kV and AC 50/60Hz. it used to switch on and offload-breaking current and short-circuit current. lt is made as per lEC62271-105.
Category: Switchgear & Medium Voltage LBS
Brand:JGGY Electric
Model: FN7-24R
Power: 24KV/630A
FOB Port: Ningbo/Shanghai
Terms ofPyament: Western Union, T/T, Paypal

China XUCKY Electric customized JR20 Thermal Overload Relays are suitable for circuits with AC 50Hz, voltages up to 660V, and currents up to 630A, to protect against overload, phase failure and three phase unbalance of AC motor.