China ES1-31.5 Indoor Earthing Switch Manufacturer, Supplier, Factory

PV-30s 1500VDC Solar PV fuse link (φ10.3x38)mm

XUCKY, a reputable manufacturer in China, is willing to offer you Smart Switch And Socket. We promise to provide you with the best after-sale support and prompt delivery.

XUCKY Electric is a leading China manufacturer and exporter specializing in GW4-27.5kv Outdoor Disconnector. We have a wide range of products to meet the different needs of our customers worldwide. GW4-27.5 electrified railway Outdoor Disconnector is outdoor high voltage electrical equipment with frequency of 50Hz, to change in the AC 27.5KV contact network high voltage circuit under no-load condition, and for electrical isolation of the high voltage bus, circuit breaker, and other electrical equipment which are overhauled and high voltage line. It can also be used to open and close low capacitance current and inductance current.

DZ49-63 Series Miniature Circuit Breaker are intended for protecting distribution and group systems having different loads:
- electric appliances, lighting – V characteristic switches;
- drives with moderate starting currents (compressor, fan group) - C characteristic switches;
- drives with high starting currents (hoisting mechanisms, pumps) - D characteristic switches;
Miniature circuit breaker DA47N-63 are recommended for use in electrical distribution panels of residential and public buildings.

XUCKY NDM1 Moulded Case Circuit Breaker (NDM1, hereinafter referred to as MCCB), is new circuit breakers which have been designed and developed by the company using international advanced technology. The circuit breakers are of the following characteristics: compact size, high breaking capacity, short arc-over distance and shakeproof, is ideal products applied on land or ships. The rated insulation voltage of the circuit breaker is 800V (500V for NDM1-63), it is suitable for the distribution network of AC 50Hz / 60Hz, rated working voltage of 690V and rated current of 1250A, to distribute power and protect circuit and power equipment from being damaged caused by overload , short-circuit, under-voltage and other fault. Also for protection infrequent conversion of the circuits and infrequent start of motor and overload, short circuit, under voltage.

XUCKY HR17B Fuse Switch Disconnector can be operated with load. It is applicable to rated current 40A~630A. There are 2 groups, 3 groups and 4 groups. It can be mounted on the busbar and installed on the fixed plate. It also provides the input and output structure of the upper and lower ends, knife-edge introduction and the arc extinguishing device; and the closed detection hole is on the switch cover, the signal switch and the detection switch are built. It can be equipped with fuse monitor and used as a knife switch.