Web Menu

Product Search

Language

Products

China RCBO 4.5KA Residual Current Circuit Breaker with Overcurrent Protection Manufacturer, Supplier, Factory

We are looking forward to your buy RCBO 4.5KA Residual Current Circuit Breaker with Overcurrent Protection from our company made in China - XUCKY. Our factory is a RCBO 4.5KA Residual Current Circuit Breaker with Overcurrent Protection manufacturer and supplier in China. You are welcome to buy our high quality products.

Related Products

Hot Products

  • LXK Current Transformer

    LXK Current Transformer

    China XUCKY Electric customized LXK Current Transformer at 35kV and below. AC 50Hz line for the power system as well as the high voltage three-phase alternator, the motor's zero sequence over-current protection,and applies only to indoor. The outer diameter of the output cable is not greater than 120mm.
    ●This type of transformer is divided into two halves.Into a half circle type cast resin,and then clamping hoop connection.
    ●Installation can be mounted transformer is divided into two halves.Then merged into one,very easy to install.
  • FN5-12 Series Indoor High Voltage Air Load Break Switch

    FN5-12 Series Indoor High Voltage Air Load Break Switch

    Support customized mass production FN5-12 series indoor high voltage air load break switch (Hereinafter referred to as load break switch) applies to AC 50Hz 12kV network, for breaking load current and closing short circuit current. Load break switch with fuse can cut off short circuit current for switch protection. The load break switch can be used with CS6-1 type manual operating mechanism, and this product special uses CS manual operating mechanism.
  • JDZX10 Type Voltage Transformer

    JDZX10 Type Voltage Transformer

    XUCKY Electric is a leading China manufacturer and exporter specializing in JDZX10 Type Voltage Transformer. Voltage transformers are much like small power transformers, differing only in details of design that control ratio accuracy over the specified range of output. Current transformers have their primary windings connected in series with the power circuit, and so also in series with the system impedance.
  • Drop-Out Arresters

    Drop-Out Arresters

    XUCKY Electric brand’s Drop-Out Arresters is a modified zinc oxide lightning arrester that is cleverly installed on the drop type mechanism of the drop type fuse. It can be easily tested, repaired, and replaced with the help of an insulation pull lever under continuous power supply. This not only ensures the smooth operation of the line, but also greatly reduces the work intensity and time of power maintenance personnel, Especially suitable for places that are not suitable for power outages, such as communication, airports, stations, hospitals, bustling commercial areas, etc. The other performance of the product is the same as that of the distribution type lightning arrester.
  • Drop Type Fuse Cutout

    Drop Type Fuse Cutout

    High quality customized products Drop type fuse cutouts are outdoor high voltage protection facilities. The fuse is installed at high voltage side of transformeror branch line of distribution line to protect transformer or transmission line from short circuit and overload,to break and connect load current.
  • JSZV12A Type Voltage Transformer

    JSZV12A Type Voltage Transformer

    China XUCKY Electric customized JSZV12A Type Voltage Transformer, our products are high quality with ASTA, KEMA, SEMKO, CE, CB, ROHS certificate.
    ■ Installation site: indoor
    ■ Ambient temperature: -15℃～+40℃, daily average temperature not more than +30℃
    ■ Altitude: does not exceed 1,000 m
    ■ Humidity: the average value of the relative humidity measure for a period of 24 h does not exceed 95 percent
    ■ Contamination severity: class Ⅱ
    ■ No severe shake or bump in the installation site
    ■ The ambient air is not significantly polluted by dust, smoke

  • How to maintain the vs1 vacuum circuit breaker?

    The main components of VS1 vacuum circuit breaker are: operating mechanism, vacuum arc extinguishing chamber, handcart type with a chassis car. And the operating mechanism is one of the main parts. So how should we maintain the VS1 vacuum circuit breaker operating mechanism in daily life?

  • What is the development prospect of intelligent mini Circuit breaker?

    When it comes to the intelligent circuit breaker in China, the development and current situation of the low-voltage circuit breaker in China have to be mentioned. Low-voltage circuit breaker is one of the most complex low-voltage electrical appliances, the highest technical content and economic value, and the most important products in low-voltage distribution system.

  • What is a changeover switch?

    A changeover switch is an electronic component that can switch a signal in a circuit from one path to another.It usually consists of multiple switchable electrical contacts and mechanical or electronic devices that control the state of these contacts.

  • What are the tripping methods of air circuit breakers?

    There are actually three main tripping methods for air circuit breakers. The first is electromagnetic tripping. The second type is thermal trip. The third type is compound tripping.

  • XUCKY Company to Conduct Market Research and Customer Visits in Malaysia

    XUCKY Company, a leading manufacturer of high-quality electrical products, is set to embark on a week-long market research and customer visitation trip in Malaysia from October 1st to October 6th, 2024. The primary objective of this initiative is to strengthen existing relationships and forge new partnerships with distributors, resellers, and panel builders in the region.

  • What is the difference between the load switch and the isolation switch?

    The first difference between the load break switch and the isolation switch is that the load switch has an arc extinguishing device, and the isolation switch does not have such a device, so what is the difference between having this arc extinguishing device? The so-called arc extinguishing device is to be able to better help to switch the electrical disconnect and closure, but also to effectively limit the arc, to help the arc out. There is such a kind of arc extinguishing device, the switch electrical is more safe. So most of the switchgear inside is by the arc extinguishing device. Especially for household switching appliances.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept