China GW5-72.5 Outdoor High Voltage Disconnect Switch Manufacturer, Supplier, Factory

XUCKY NDM1 Moulded Case Circuit Breaker (NDM1, hereinafter referred to as MCCB), is new circuit breakers which have been designed and developed by the company using international advanced technology. The circuit breakers are of the following characteristics: compact size, high breaking capacity, short arc-over distance and shakeproof, is ideal products applied on land or ships. The rated insulation voltage of the circuit breaker is 800V (500V for NDM1-63), it is suitable for the distribution network of AC 50Hz / 60Hz, rated working voltage of 690V and rated current of 1250A, to distribute power and protect circuit and power equipment from being damaged caused by overload , short-circuit, under-voltage and other fault. Also for protection infrequent conversion of the circuits and infrequent start of motor and overload, short circuit, under voltage.

XUCKY Electric is a leading China manufacturer and exporter specializing in VS1-24 Series Indoor High Voltage Vacuum Circuit Breaker. We have a wide range of products to meet the different needs of our customers worldwide. Our commitment to superior quality, innovative technology and excellent customer service makes us stand out in our industry.

XUCKY Electric is a leading China manufacturer and exporter specializing in GW4-27.5kv Outdoor Disconnector. We have a wide range of products to meet the different needs of our customers worldwide. GW4-27.5 electrified railway Outdoor Disconnector is outdoor high voltage electrical equipment with frequency of 50Hz, to change in the AC 27.5KV contact network high voltage circuit under no-load condition, and for electrical isolation of the high voltage bus, circuit breaker, and other electrical equipment which are overhauled and high voltage line. It can also be used to open and close low capacitance current and inductance current.

High quality customized products FN7-12 Series Indoor High Voltage Air Load Break Switch from China suppliers and manufacturers, XUCKY Electric have FN7-12DR type indoor AC off-voltage load break switch is applicable to AC 50Hz, rated voltage 12KV in the three-phase AC power system as a load current breaking and closing short-circuit current use, the combination of electrical appliances can open any current up to short-circuit current, can be used as protection.

CJ12 AC Contactor is mainly used for electric equipment of metallurgy, electric power and hoister. It is suitable for the circuit of AC 50/60Hz, the voltage up to 380V, current up to 600A for remove making and breaking circuit, and frequency starting, stopping and inverse AC motor. The products comply with IEC60947-4.

Support customized mass production FN5-12 series indoor high voltage air load break switch (Hereinafter referred to as load break switch) applies to AC 50Hz 12kV network, for breaking load current and closing short circuit current. Load break switch with fuse can cut off short circuit current for switch protection. The load break switch can be used with CS6-1 type manual operating mechanism, and this product special uses CS manual operating mechanism.