China GV2-ME Series Motor Protection Circuit Breaker Manufacturer, Supplier, Factory

High quality customized products GW5-40.5 Disconnect Switch is used to make or break high voltage circuit in rated voltage 40.5kV, 72.5kV, 126/145KV, AC50160Hz system. lt is able to open and close small capacitance and indudive current. This disconnect switch accords with standards: lEC62271.103High voltage switches. GB1985: AC High voltage disconnect switch and ear thing swich and lE060694 & GB/T11022: Common technical requirements of HV switchgear and control equipment.

XUCKY Electric is a large-scale M1 Molded Case Circuit Breaker manufacturer and supplier in China. We have been specialized in Modular Electrical Terminal Equipment for many years. Our products have a good price advantage and cover most of the South America, Middle East, Africa, Southeast Asia markets. We look forward to becoming your long-term partner in China.

Support customized mass production FN5-12 series indoor high voltage air load break switch (Hereinafter referred to as load break switch) applies to AC 50Hz 12kV network, for breaking load current and closing short circuit current. Load break switch with fuse can cut off short circuit current for switch protection. The load break switch can be used with CS6-1 type manual operating mechanism, and this product special uses CS manual operating mechanism.

XUCKY M3DC series DC MCCB for PV is a safety device specifically designed for photovoltaic (PV) systems to protect circuits from over current and short-circuit conditions, is suitable for DC grid circuit with rated voltage up to DC1500V and rated current of 800A, used to distribute electric energy and protect circuit and the power supply equipment is protected from the danger of overload, short circuit, etc.

China XUCKY Electric customized FZRN61 Load Break Switch with Disconnect Switch and Earth Switches are three-phase high voltage switch equipment with rated voltage of 12KV and rated frequency of 50Hz, are used to switch load currents, closed loop current, no-load transformer and cable charging current, and make short circuit current. The three-position miniaturized vacuum load break switch equipped with an disconnect switch at the top and a earth switch at the bottom can withstand short-circuit current.

JDZXW-35 type outdoor voltage transformer is a completely closed structure of epoxy resin vacuum pouring. It is suitable for voltage, power measurement and relay protection in power systems with rated frequency 50HZ, rated voltage 35KV and outdoor devices below. This type of voltage transformer is made by vacuum pouring of epoxy resin with arc resistance, ultraviolet resistance and aging resistance. The transformer does not need special maintenance, only need to regularly clean the surface dirt, due to the transformer is fully sealed pouring insulation, small volume, light weight, suitable for any position, any direction installation. The secondary outlet terminal of the transformer is sealed with a metal protective cover.