China MPCB Manufacturer, Supplier, Factory

HG2B In-line Fuse Switch Disconnector is suitable for AC rated voltage 660V and below, AC 160A~630A, rated AC frequency 50Hz. With load operation, the first current transformer and bar switch integration, with the advantages of convenient adjustment of upper-lower inlet-outlet, three-phase separate breaking, three phase simultaneous breaking and others, widely used in complete sets of products and imported box substation.

XUCKY PV SPD surge protective device is applicable to the low-voltage standard IEC EN 50539-11, and is used to protect the DC system and other equipment from overvoltage and instantaneous overvoltage damage. When DC system experiences surge overvoltage due to lightning strikes or other reasons, the protector immediately conducts within nanosecond time, introducing surge overvoltage to the ground, thereby protecting the electrical equipment on the point network. DC surge protection device is a plug-in structure that can be quickly replaced after a module failure; After the lightning protection module fails, the color of the indicator window changes from green to red, and an alarm signal is sent to the remote alarm device connected to the remote signal terminal of the product.

3kv-36kv Zinc Oxide Lightning Arrester is a device to protect electrical equipment from overvoltage transients caused by external (lightning) or internal (switching) events. Also called a surge protection device (SPD) or transient voltage surge suppressor (TVSS), this class of device is used to protect equipment in power transmission and distribution systems. (For consumer equipment protection, different products called surge protectors are used.) The energy criterion for various insulation material can be compared by impulse ratio, the surge arrester should have a low impulse ratio, so that a surge incident on the surge arrester may be bypassed, to the ground instead of passing through the apparatus.

L1-63 residual current circuit breakers are protection equipment which must be used to protect human life against dangerous electric shocks or prevent the fires arising out of isolation mistakes thereby detecting isolation mistakes to occur within the plant in advance. Sigma residual current circuit breakers are produced with 2 and 4 poles in accordance with IEC EN 61008-1 standard and in compliance with CE norms under ISO 9001:2008 quality assurance system.

XUCKY Electric is a leading China manufacturer and exporter specializing in GW4-27.5kv Outdoor Disconnector. We have a wide range of products to meet the different needs of our customers worldwide. GW4-27.5 electrified railway Outdoor Disconnector is outdoor high voltage electrical equipment with frequency of 50Hz, to change in the AC 27.5KV contact network high voltage circuit under no-load condition, and for electrical isolation of the high voltage bus, circuit breaker, and other electrical equipment which are overhauled and high voltage line. It can also be used to open and close low capacitance current and inductance current.

XUCKY Electric is a leading China manufacturer and exporter specializing in VS1-24 Series Indoor High Voltage Vacuum Circuit Breaker. We have a wide range of products to meet the different needs of our customers worldwide. Our commitment to superior quality, innovative technology and excellent customer service makes us stand out in our industry.