Products

China Automatic Transfer Switch Intelligent MCB Type Manufacturer, Supplier, Factory

We insist over the principle of enhancement of 'High high quality, Efficiency, Sincerity and Down-to-earth working approach' to offer you with superb assistance of processing for Automatic Transfer Switch Intelligent MCB Type, 3-phase Automatic Transfer Switch ATS, We're incredibly proud with the excellent name from our shoppers for our products' trustworthy quality.
Automatic Transfer Switch Intelligent MCB Type, Due to our dedication, our products are well known throughout the world and our export volume continuously grows every year. We will continue to strive for excellence by providing high quality products that will exceed the expectation of our customers.

Hot Products

  • GW4-27.5kv Outdoor Disconnector

    GW4-27.5kv Outdoor Disconnector

    XUCKY Electric is a leading China manufacturer and exporter specializing in GW4-27.5kv Outdoor Disconnector. We have a wide range of products to meet the different needs of our customers worldwide. GW4-27.5 electrified railway Outdoor Disconnector is outdoor high voltage electrical equipment with frequency of 50Hz, to change in the AC 27.5KV contact network high voltage circuit under no-load condition, and for electrical isolation of the high voltage bus, circuit breaker, and other electrical equipment which are overhauled and high voltage line. It can also be used to open and close low capacitance current and inductance current.
  • AFDD-32 Series Arc Fault Protectors

    AFDD-32 Series Arc Fault Protectors

    XUCKY's AFDD-32 Series Arc Fault Protectors arc-protected type B + residual current operated circuit breaker (Af-rcbo-RRB- protects against arc, residual current, over-under voltage, overload transients, etc., it is recommended to use in the places with dense personnel and inflammable materials, such as home, school, nursing home, hotel, historic buildings and so on.
  • Q3 Automatic Transfer Switch ATS

    Q3 Automatic Transfer Switch ATS

    The XUCKY high-quality Q3 Automatic Transfer Switch ATS (hereinafter referred to as ATS) is suitable for power supply systems with AC 50Hz, rated voltage of 400V, and rated current of 63A and below. We offer two types of power switches, allowing you to choose between two power supplies based on your needs.
  • ZW32-12 Outdoor Vacuum Circuit Breaker

    ZW32-12 Outdoor Vacuum Circuit Breaker

    ZW32-12 outdoor vacuum circuit breaker (hereinafter referred to as "vacuum circuit breaker") is a three-phase AC 50Hz outdoor high voltage switch equipment, mainly used in the 10KV outdoor distribution system of the rural and urban network as the open or close load current, the overload current and the short circuit current, and can also be used in other similar places. ZW32-12 outdoor vacuum circuit breaker meet the national GB 1984-2003, IEC62271-100 "AC high voltage circuit breaker" and GB/T11022-1999 "Common technical requirements for high voltage switchgear and control equipment standards".
  • FZRN61 Load Break Switch with Disconnect Switch and Earth Switch

    FZRN61 Load Break Switch with Disconnect Switch and Earth Switch

    China XUCKY Electric customized FZRN61 Load Break Switch with Disconnect Switch and Earth Switches are three-phase high voltage switch equipment with rated voltage of 12KV and rated frequency of 50Hz, are used to switch load currents, closed loop current, no-load transformer and cable charging current, and make short circuit current. The three-position miniaturized vacuum load break switch equipped with an disconnect switch at the top and a earth switch at the bottom can withstand short-circuit current.
  • Over and Under Voltage Protector

    Over and Under Voltage Protector

    XUCKY high-quality over and under voltage protector can monitor voltage, current, power and frequency in real time, providing all-round protection for equipment to avoid burn-in, shutdown and loss caused by voltage fluctuation. At the same time, it has the characteristics of simple installation, clear display and adjustable parameters.
    Model: PN2-VA4
    1. Over/Under Voltage Protection
    2. Over Current Protection
    3. Large LED Digital Display
    4. Adjustable Parameter Settings
    5. Customizable Logo Display
    6. Microcontroller-Based Intelligent Control
    7. Din-Rail Mounting for Easy Installation

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept