Products

XUCKY HR17B Fuse Switch Disconnector can be operated with load. It is applicable to rated current 40A~630A. There are 2 groups, 3 groups and 4 groups. It can be mounted on the busbar and installed on the fixed plate. It also provides the input and output structure of the upper and lower ends, knife-edge introduction and the arc extinguishing device; and the closed detection hole is on the switch cover, the signal switch and the detection switch are built. It can be equipped with fuse monitor and used as a knife switch.

HG2B In-line Fuse Switch Disconnector is suitable for AC rated voltage 660V and below, AC 160A~630A, rated AC frequency 50Hz. With load operation, the first current transformer and bar switch integration, with the advantages of convenient adjustment of upper-lower inlet-outlet, three-phase separate breaking, three phase simultaneous breaking and others, widely used in complete sets of products and imported box substation.

As the professional manufacture, XUCKY would like to provide you impulse relays. BIR series impulse relay coils are triggered by impulses and the contacts are closed. The product has two stable mechanical positions, and the contacts will open temporarily with the next impulse. Each received impulse will reverse the position of the contact and can be controlled by an unlimited number of buttons. And has the characteristics of zero power consumption. Impulse relay can be used to control the lighting circuit through the button. The circuit consists of incandescent lamps, halogen lamps, etc.

As the professional manufacturer, XUCKY would like to provide you high performance S5 Automatic Transfer Switch, which in a environment of rated working current of 16A to 630A to do switchover between the power supplies in case one of them becomes abnormal so as to ensure its continuity and reliability in power supply.

XUCKY CM1E Molded Case Circuit Breaker (hereinafter referred to as circuit breaker), the circuit breaker has small size, high breaking capacity, short arc, anti vibration. Its rated insulation voltage is 800V, suitable for the distribution network of AC 50Hz, rated voltage AC400V, rated current up to 1250A and below, used to distribute electrical energy and protect the circuit and power equipment from overload, short-circuit, undervoltage and other faults. It can also be used for the infrequent conversion of the line and the infrequent starting of the motor. The circuit breaker can be vertically installed, or horizontally installed. The low voltage circuit breaker has isolation function.

XUCKY, a reputable manufacturer in China, is willing to offer you Smart Switch And Socket. We promise to provide you with the best after-sale support and prompt delivery.

As one of professional manufacturers in China, XUCKY would like to provide you SLA6H Pushbutton Switch. And we will offer you the best after-sale service and timely delivery.

The PV combiner box is a wiring device in the photovoltaic power generation system that ensures the orderly connection and confluence function of photovoltaic modules. This device can ensure that the photovoltaic system is easy to cut off the circuit during maintenance and inspection, and reduce the range of power outage in case of photovoltaic system failure. The combiner box means that the user can connect a certain number of photovoltaic cells with the same specification in series to form a photovoltaic tandem, and then connect several photovoltaic tandem to the photovoltaic combiner box in parallel. After converging in the photovoltaic combiner box, through the controller, DC distribution cabinet, Solar inverter, and AC distribution cabinet, a complete photovoltaic power generation system can be formed to achieve grid connection with the mains.

PV-30s 1500VDC Solar PV fuse link (φ10.3x38)mm