Products

JDZXW-35 type outdoor voltage transformer is a completely closed structure of epoxy resin vacuum pouring. It is suitable for voltage, power measurement and relay protection in power systems with rated frequency 50HZ, rated voltage 35KV and outdoor devices below. This type of voltage transformer is made by vacuum pouring of epoxy resin with arc resistance, ultraviolet resistance and aging resistance. The transformer does not need special maintenance, only need to regularly clean the surface dirt, due to the transformer is fully sealed pouring insulation, small volume, light weight, suitable for any position, any direction installation. The secondary outlet terminal of the transformer is sealed with a metal protective cover.

JSZVR type voltage transformer of epoxy resin cast insulated and totally-enclosed structure is intended for power measurement, current monitoring and relay protection in the line of up to 12 kV and AC 50-60 Hz.
●It is applicable to air insulated switchgear
●It conforms to GB1207 and lEC60044-2 standards

China XUCKY Electric customized JSZV12A Type Voltage Transformer, our products are high quality with ASTA, KEMA, SEMKO, CE, CB, ROHS certificate.
■ Installation site: indoor
■ Ambient temperature: -15℃～+40℃, daily average temperature not more than +30℃
■ Altitude: does not exceed 1,000 m
■ Humidity: the average value of the relative humidity measure for a period of 24 h does not exceed 95 percent
■ Contamination severity: class Ⅱ
■ No severe shake or bump in the installation site
■ The ambient air is not significantly polluted by dust, smoke

China XUCKY Electric customized KJ1 Series Switch And Socket may be a specific brand or model of electrical products used for power control and distribution in home, office or industrial environments. Such products usually follow certain electrical standards and safety specifications to ensure their safety and reliability during use.

China XUCKY Electric customized Intelligent AC Charging Pile is at the forefront of innovation with our Intelligent Charging Pile, a game-changing solution that embodies the future of electric vehicle (EV) charging. Tailored to meet the growing demand for sustainable and efficient charging infrastructure, our Smart Charging Pile integrates seamlessly into the evolving landscape of electric mobility.

A changeover switch is an electrical switch that allows the load to be switched from one power source to another and vice versa, either manually or automatically.
On the other hand, changeover switches also prevent utility employees from electrical accidents by keeping the current moving within the correct limits.
changeover switches also ensure that the power source is properly isolated when not in use.
On the other hand, electrical changeover switches have a wide range of applications, whether it is a simple household application or a critical commercial and industrial application.
Some examples of use cases are as follows:
●Telecommunications and data networks
●Factories and industrial processes
●Hospitals and medical institutions
●Educational institutions
●Malls
●Warehouses
●Small and medium-sized businesses

XUCKY voltage protection device is an intelligent adjustable voltage and current protector. integrating overvoltage protection, undervoltage protection and overcurrent protection. Applicable to single-phase AC voltage 110V~240V, rated working frequency 50/60Hz, Maximum working current 63A. In case of over-voltage fault, under-voltage fault and over-current fault in the Live wire , this product can instantly cut off the power supply and protect the electrical equipment from burning. When the line returns to normal, the voltage protector can automatically reconnect the line. The overvoltage value, undervoltage value, overcurrent value and protection time of the product can be adjusted. It is mainly used for overvoltage/undervoltage protection of incoming lines of residential, photovoltaic and factory distribution boxes.

XUCKY HR17B Fuse Switch Disconnector can be operated with load. It is applicable to rated current 40A~630A. There are 2 groups, 3 groups and 4 groups. It can be mounted on the busbar and installed on the fixed plate. It also provides the input and output structure of the upper and lower ends, knife-edge introduction and the arc extinguishing device; and the closed detection hole is on the switch cover, the signal switch and the detection switch are built. It can be equipped with fuse monitor and used as a knife switch.

HG2B In-line Fuse Switch Disconnector is suitable for AC rated voltage 660V and below, AC 160A~630A, rated AC frequency 50Hz. With load operation, the first current transformer and bar switch integration, with the advantages of convenient adjustment of upper-lower inlet-outlet, three-phase separate breaking, three phase simultaneous breaking and others, widely used in complete sets of products and imported box substation.