China VCB Manufacturer, Supplier, Factory

FLN36-12 Indoor High-voltage Sulfur Hexafluoride Load Switch is a medium-voltage switchgear developed by a professional manufacturer XUCKY. It is a multifunctional medium voltage switchgear that integrates switching, opening and grounding functions. It adopts a fully sealed, reinforced epoxy resin shell filled with 0.05MPa SF6 gas. Welcome to contact us!

Q2 Automatic Transfer Switch (hereinafter referred to as ATS switch, also known as home transfer switch) for dual power supply system of AC 50Hz, rated voltage of 380V, rated current of 63A~630A, use automatic or manual operation modes to switch between the common power supply and standby power supply. The home transfer switch is mainly used for hospitals, shops, banks, chemical industry, metallurgy, high-rise buildings, military facilities and other important occasions.

China XUCKY Electric customized JSZV12A Type Voltage Transformer, our products are high quality with ASTA, KEMA, SEMKO, CE, CB, ROHS certificate.
■ Installation site: indoor
■ Ambient temperature: -15℃～+40℃, daily average temperature not more than +30℃
■ Altitude: does not exceed 1,000 m
■ Humidity: the average value of the relative humidity measure for a period of 24 h does not exceed 95 percent
■ Contamination severity: class Ⅱ
■ No severe shake or bump in the installation site
■ The ambient air is not significantly polluted by dust, smoke

China XUCKY Electric customized JDZX9-35 Type Voltage Transformer. There are three primary types of voltage transformers (VT): electromagnetic, capacitor, and optical. The electromagnetic voltage transformer is a wire-wound transformer. The capacitor voltage transformer uses a capacitance potential divider and is used at higher voltages due to a lower cost than an electromagnetic VT.

DZ49-63 Series Miniature Circuit Breaker are intended for protecting distribution and group systems having different loads:
- electric appliances, lighting – V characteristic switches;
- drives with moderate starting currents (compressor, fan group) - C characteristic switches;
- drives with high starting currents (hoisting mechanisms, pumps) - D characteristic switches;
Miniature circuit breaker DA47N-63 are recommended for use in electrical distribution panels of residential and public buildings.

Wholesale LR9 thermal overload relay manufacturer, 32A/690V, thermal setting range 6.4-32A, selectable tripping class 5-10-20-30, for protection of 3-phase motors 3-15KW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, buttons for test, stop and reset as well as manual-automatic reset selector, dipswitches for tripping class selection, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. With a large thermal setting range 6.4-32A, a selectable tripping class 5-10-20-30 and phase unbalance detection, it protects motors 3 to 11KW@400V. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D09-D38. Mounting on DIN rail or screw fixing, separated from contactor, with use of the terminal block LAD7B205 (to be ordered separately). Multi-standards certified (IEC, UL, CSA, CCC), Green Premium compliant (RoHs/Reach).