China JN15-31.5 Series Earthing Switch Manufacturer, Supplier, Factory

CJ12 AC Contactor is mainly used for electric equipment of metallurgy, electric power and hoister. It is suitable for the circuit of AC 50/60Hz, the voltage up to 380V, current up to 600A for remove making and breaking circuit, and frequency starting, stopping and inverse AC motor. The products comply with IEC60947-4.

DZ49-63 Series Miniature Circuit Breaker are intended for protecting distribution and group systems having different loads:
- electric appliances, lighting – V characteristic switches;
- drives with moderate starting currents (compressor, fan group) - C characteristic switches;
- drives with high starting currents (hoisting mechanisms, pumps) - D characteristic switches;
Miniature circuit breaker DA47N-63 are recommended for use in electrical distribution panels of residential and public buildings.

XUCKY Electric is a large RCBO Circuit Breaker manufacturer and supplier in China. For many years, we have been specializing in Modular Electrical Terminal Equipment, our products have good price advantage and cover most of the European and American markets. We are looking forward to being your long-term partner in China.

Support customized mass production FN5-12 series indoor high voltage air load break switch (Hereinafter referred to as load break switch) applies to AC 50Hz 12kV network, for breaking load current and closing short circuit current. Load break switch with fuse can cut off short circuit current for switch protection. The load break switch can be used with CS6-1 type manual operating mechanism, and this product special uses CS manual operating mechanism.

High quality MPH Shrinkable Busbar Conjunction Box from Chinese suppliers. Support customized mass production MPH series busbar conjunction box has the characteristics of convenient installation and long service life.

XUCKY PV SPD surge protective device is applicable to the low-voltage standard IEC EN 50539-11, and is used to protect the DC system and other equipment from overvoltage and instantaneous overvoltage damage. When DC system experiences surge overvoltage due to lightning strikes or other reasons, the protector immediately conducts within nanosecond time, introducing surge overvoltage to the ground, thereby protecting the electrical equipment on the point network. DC surge protection device is a plug-in structure that can be quickly replaced after a module failure; After the lightning protection module fails, the color of the indicator window changes from green to red, and an alarm signal is sent to the remote alarm device connected to the remote signal terminal of the product.