China ALFHA MCB Manufacturer, Supplier, Factory

High quality customized products F360 Series Residual Current Circuit Breaker from China suppliers and manufacturers, XUCKY Electric have a wide range of products to meet the different needs of our customers worldwide. Our commitment to superior quality, innovative technology and excellent customer service makes us stand out in our industry.

XUCKY PV SPD surge protective device is applicable to the low-voltage standard IEC EN 50539-11, and is used to protect the DC system and other equipment from overvoltage and instantaneous overvoltage damage. When DC system experiences surge overvoltage due to lightning strikes or other reasons, the protector immediately conducts within nanosecond time, introducing surge overvoltage to the ground, thereby protecting the electrical equipment on the point network. DC surge protection device is a plug-in structure that can be quickly replaced after a module failure; After the lightning protection module fails, the color of the indicator window changes from green to red, and an alarm signal is sent to the remote alarm device connected to the remote signal terminal of the product.

High quality customized products GN19-12 Indoor High Voltage Isolation Switch (also known as the indoor high voltage AC drop-out fuse) is the indoor device with rated voltage 12KV, three phase AC 60Hz, used to break and make circuit under no-load but with voltage.

China XUCKY Electric customized LXK Current Transformer at 35kV and below. AC 50Hz line for the power system as well as the high voltage three-phase alternator, the motor's zero sequence over-current protection,and applies only to indoor. The outer diameter of the output cable is not greater than 120mm.
●This type of transformer is divided into two halves.Into a half circle type cast resin,and then clamping hoop connection.
●Installation can be mounted transformer is divided into two halves.Then merged into one,very easy to install.

China XUCKY Electric customized JDZ10 Type Voltage Transformers are semi-enclosed voltage transformers cast with epoxy resin for voltages of 50Hz, 3, 6, and 10KV power systems. Energy measurement and relay protection. Product performance in line with standards GB1207-2006 and IEC60186.

XUCKY SPD Surge protective Device, B, C, D series large current modular SPD Surge protective Device is used for power supply systems of AC 50/60Hz, the TT, IT, TN-S, TN-C, TN-C-S of rated voltage 380V and below, to protect the power grid caused by lightning or surge overvoltage. The design is based on the IEC61643-1, it can discharge the 100kA lightning current, case is installed on 35mm electric rail, the detachment device automatically will be out of its power grid, meanwhile the status indicator turns from green to red. SPD Surge protective Device has protection modes of common mode (MC) and differential mode (MD).