Products

High quality customized products FN7-12 Series Indoor High Voltage Air Load Break Switch from China suppliers and manufacturers, XUCKY Electric have FN7-12DR type indoor AC off-voltage load break switch is applicable to AC 50Hz, rated voltage 12KV in the three-phase AC power system as a load current breaking and closing short-circuit current use, the combination of electrical appliances can open any current up to short-circuit current, can be used as protection.

High quality customized products FN7-24 Indoor HV Load Break Switch applies to three-phase powersupply system of rated voltage 12/24kV and AC 50/60Hz. it used to switch on and offload-breaking current and short-circuit current. lt is made as per lEC62271-105.
Category: Switchgear & Medium Voltage LBS
Brand:JGGY Electric
Model: FN7-24R
Power: 24KV/630A
FOB Port: Ningbo/Shanghai
Terms ofPyament: Western Union, T/T, Paypal

XUCKY Electric brand's FN12-12 series indoor high voltage air load break switch is a 3-phase AC 50Hz 12kV indoor switch equipment.
♦ Installation way: front-mounted, side mounted, flip mounted;
♦ Operating mechanism: spring operating mechanism, manual type and electrical type available;
♦ Operation type: right operation and left operation;
♦ Application: indoor 12kv switchgear.

3kv-36kv Zinc Oxide Lightning Arrester is a device to protect electrical equipment from overvoltage transients caused by external (lightning) or internal (switching) events. Also called a surge protection device (SPD) or transient voltage surge suppressor (TVSS), this class of device is used to protect equipment in power transmission and distribution systems. (For consumer equipment protection, different products called surge protectors are used.) The energy criterion for various insulation material can be compared by impulse ratio, the surge arrester should have a low impulse ratio, so that a surge incident on the surge arrester may be bypassed, to the ground instead of passing through the apparatus.

XUCKY Electric brand’s Drop-Out Arresters is a modified zinc oxide lightning arrester that is cleverly installed on the drop type mechanism of the drop type fuse. It can be easily tested, repaired, and replaced with the help of an insulation pull lever under continuous power supply. This not only ensures the smooth operation of the line, but also greatly reduces the work intensity and time of power maintenance personnel, Especially suitable for places that are not suitable for power outages, such as communication, airports, stations, hospitals, bustling commercial areas, etc. The other performance of the product is the same as that of the distribution type lightning arrester.

The composite post insulator can be effectively used the narrow corridor to drive down the power supply, which is suitable for thetrans formation of the city network technology and high voltage power line service.
The composite post insulator has features of good hydrophobicity anti-ageing, anti-leakage trace and electric erode proof, tensile strength and bending strength, strong mechanical strength, shock resistance good quake proof and brittle failure proof, light weight. Easy to installation.

High quality customized products Drop type fuse cutouts are outdoor high voltage protection facilities. The fuse is installed at high voltage side of transformeror branch line of distribution line to protect transformer or transmission line from short circuit and overload,to break and connect load current.

High quality customized products GN19-12 Indoor High Voltage Isolation Switch (also known as the indoor high voltage AC drop-out fuse) is the indoor device with rated voltage 12KV, three phase AC 60Hz, used to break and make circuit under no-load but with voltage.

High quality customized products GN30-12 Rotary Indoor High Voltage Disconnect from China suppliers and manufacturers. GN30-12/630 Rotary Indoor High Voltage Disconnect is a rotary touch knife type of new isolation switch, the main structure is in the three-phase under the base frame, the next two planes, fixed two groups of crepe and contact, by rotating the touch knife, in order to achieve the switch off the closing.