China Switch and Socket Manufacturer, Supplier, Factory

ZW32-12 outdoor vacuum circuit breaker (hereinafter referred to as "vacuum circuit breaker") is a three-phase AC 50Hz outdoor high voltage switch equipment, mainly used in the 10KV outdoor distribution system of the rural and urban network as the open or close load current, the overload current and the short circuit current, and can also be used in other similar places. ZW32-12 outdoor vacuum circuit breaker meet the national GB 1984-2003, IEC62271-100 "AC high voltage circuit breaker" and GB/T11022-1999 "Common technical requirements for high voltage switchgear and control equipment standards".

Wholesale M13 Moulded Case Circuit Breaker manufacturer specialized in production and R&D M13 Molded Case Circuit Breaker (M13, hereinafter referred to as MCCB), is new circuit breakers which have been designed and developed by the company using international advanced technology. The circuit breakers are of the following characteristics: compact size, high breaking capacity, short arc-over distance and shakeproof, is ideal products applied on land or ships.

ZW20-12 Series Outdoor High Voltage Vacuum Circuit Breaker is a 3-phase AC 50Hz 12kV outdoor switch equipment.
♦ Installation way: pole mounted;
♦ Pole type: integrated pole;
♦ Application: outdoor 12kV substation, power plant.
♦ Operation type: manual, electric, remote control.

VSG-24 series indoor high voltage vacuum circuit breaker is a 3-phase AC 50Hz 24kV indoor switch equipment
♦ Operating mechanism: spring operating mechanism;
♦ Pole type: assembled pole: embedded pole;
♦ phase-to-phase distance: 275mm;

The arc fault detection devices AFDD (hereinafter referred to as AFDD) can effectively detect the fault arc in the access line, including the fault parallel arc and the fault series arc. When the fault arc causing fire is detected in the line, it can perform the function of disconnection and power-off to realize the purpose of early warning of fire. The arc fault dectection device is applicable to the electrical lines of 10kW and below in industrial and civil buildings. The length of the protection line should not be greater than 100m. The products comply with GB/t31143-2014 IEC62602 standard and can be applied to nursing homes, schools, commercial buildings, hotels, factories, warehouses, libraries, offices, family houses, and entertainment places.

CJ12 AC Contactor is mainly used for electric equipment of metallurgy, electric power and hoister. It is suitable for the circuit of AC 50/60Hz, the voltage up to 380V, current up to 600A for remove making and breaking circuit, and frequency starting, stopping and inverse AC motor. The products comply with IEC60947-4.