China Motor Control Circuit Breaker Manufacturer, Supplier, Factory

XUCKY PV SPD surge protective device is applicable to the low-voltage standard IEC EN 50539-11, and is used to protect the DC system and other equipment from overvoltage and instantaneous overvoltage damage. When DC system experiences surge overvoltage due to lightning strikes or other reasons, the protector immediately conducts within nanosecond time, introducing surge overvoltage to the ground, thereby protecting the electrical equipment on the point network. DC surge protection device is a plug-in structure that can be quickly replaced after a module failure; After the lightning protection module fails, the color of the indicator window changes from green to red, and an alarm signal is sent to the remote alarm device connected to the remote signal terminal of the product.

The ID RCCB (Residual Current Circuit Breaker) and the F360 RCCB are two different models of L3-63 residual current circuit breakers, which are essential components in electrical systems designed to ensure safety by interrupting the circuit when an imbalance in current is detected, typically due to a ground fault or leakage current.

High quality customized products GN30-12 Rotary Indoor High Voltage Disconnect from China suppliers and manufacturers. GN30-12/630 Rotary Indoor High Voltage Disconnect is a rotary touch knife type of new isolation switch, the main structure is in the three-phase under the base frame, the next two planes, fixed two groups of crepe and contact, by rotating the touch knife, in order to achieve the switch off the closing.

Solar photovoltaic drive inverter are widely used in many fields, such as CNC machine tools, water pumps, textile machinery, etc.

Support customized mass production DZ47-63 Miniature Circuit Breaker or called MCB is mainly used in the AC 50 / 60Hz, rated operating voltage of 230V / 400V and below, rated current of 63A circuit, the circuit breaker is mainly used in electrical wiring of modern buildings and overload, short circuit protection of equipment, also applies to infrequent operation and isolation of the line.

XUCKY Electric is CJ20 AC Contactor to Control Motors manufacturers and suppliers. CJ20 AC contactor (AC/DC contactor), mainly used in the circuit of AC 50Hz (or 60Hz), rated voltage to 660V, rated operating current to 630A, for long-distance making and breaking circuit, and combination with the appropriate thermal overload relay, to protect the circuit that operation may overload. AC/DC contactor meets standards of IEC60947-4-1, GB14048.4.