Products

China M9 Series Moulded Case Circuit Breaker MCCB Manufacturer, Supplier, Factory

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of M9 Series Moulded Case Circuit Breaker MCCB, ABE Moulded Case Circuit Breaker, We have been sincerely wanting forward to cooperate with consumers all over the earth. We feel we can easily satisfy with you. We also warmly welcome buyers to visit our manufacturing unit and purchase our products and solutions.
M9 Series Moulded Case Circuit Breaker MCCB, To keep the leading position in our industry, we never stop challenging the limitation in all aspects to create the ideal products. In his way, We can enrich our life style and promote a better living environment for the global community.

Hot Products

  • JSZVR Type Voltage Transformer

    JSZVR Type Voltage Transformer

    JSZVR type voltage transformer of epoxy resin cast insulated and totally-enclosed structure is intended for power measurement, current monitoring and relay protection in the line of up to 12 kV and AC 50-60 Hz.
    ●It is applicable to air insulated switchgear
    ●It conforms to GB1207 and lEC60044-2 standards
  • BCH8 Modular Contactor

    BCH8 Modular Contactor

    China XUCKY Electric customized BCH8 Modular Contactor are new upgraded circuit breakers researched and developed by the company combined with the advantages of similar international products and demand of domestic and international markets.
  • JDZX9-35 Type Voltage Transformer

    JDZX9-35 Type Voltage Transformer

    China XUCKY Electric customized JDZX9-35 Type Voltage Transformer. There are three primary types of voltage transformers (VT): electromagnetic, capacitor, and optical. The electromagnetic voltage transformer is a wire-wound transformer. The capacitor voltage transformer uses a capacitance potential divider and is used at higher voltages due to a lower cost than an electromagnetic VT.
  • PV SPD Surge Protective Device

    PV SPD Surge Protective Device

    XUCKY PV SPD surge protective device is applicable to the low-voltage standard IEC EN 50539-11, and is used to protect the DC system and other equipment from overvoltage and instantaneous overvoltage damage. When DC system experiences surge overvoltage due to lightning strikes or other reasons, the protector immediately conducts within nanosecond time, introducing surge overvoltage to the ground, thereby protecting the electrical equipment on the point network. DC surge protection device is a plug-in structure that can be quickly replaced after a module failure; After the lightning protection module fails, the color of the indicator window changes from green to red, and an alarm signal is sent to the remote alarm device connected to the remote signal terminal of the product.
  • LZZBJ9-10 Type Current Transformer

    LZZBJ9-10 Type Current Transformer

    LZZBJ9-10 Type Current Transformer is one of the important electrical equipment in power system, it is similar to power transformer, is used to convert circuit voltage or current. However, the purpose of the power transformer switching voltage and current, is to transfer the power, voltage or current transformer transformation, the purpose of measuring and monitoring circuit voltage or current. In general, power transformer capacity is big, the change of the voltage or current error, transformer capacity is small the change of the voltage or current error is small. in the measuring circuit, which is used to convert current, the current meter and relay is called a current transformer, power transformer is used to convert voltage, the voltage meter and relay of power transformer is called voltage transformer.
  • FN7-12 Series Indoor High Voltage Air Load Break Switch

    FN7-12 Series Indoor High Voltage Air Load Break Switch

    High quality customized products FN7-12 Series Indoor High Voltage Air Load Break Switch from China suppliers and manufacturers, XUCKY Electric have FN7-12DR type indoor AC off-voltage load break switch is applicable to AC 50Hz, rated voltage 12KV in the three-phase AC power system as a load current breaking and closing short-circuit current use, the combination of electrical appliances can open any current up to short-circuit current, can be used as protection.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept