China ABE Moulded Case Circuit Breaker Manufacturer, Supplier, Factory

XUCKY PV SPD surge protective device is applicable to the low-voltage standard IEC EN 50539-11, and is used to protect the DC system and other equipment from overvoltage and instantaneous overvoltage damage. When DC system experiences surge overvoltage due to lightning strikes or other reasons, the protector immediately conducts within nanosecond time, introducing surge overvoltage to the ground, thereby protecting the electrical equipment on the point network. DC surge protection device is a plug-in structure that can be quickly replaced after a module failure; After the lightning protection module fails, the color of the indicator window changes from green to red, and an alarm signal is sent to the remote alarm device connected to the remote signal terminal of the product.

High quality New Era Series Miniature Circuit Breaker from Chinese suppliers, XUCKY Electric specialized in Modular Electrical Terminal Equipment for many years. Our products have a good price advantage and cover most of the South America, Middle East, Africa, Southeast Asia markets. We look forward to becoming your long-term partner in China.

PV-30s 1500VDC Solar PV fuse link (φ10.3x38)mm

JSZVR type voltage transformer of epoxy resin cast insulated and totally-enclosed structure is intended for power measurement, current monitoring and relay protection in the line of up to 12 kV and AC 50-60 Hz.
●It is applicable to air insulated switchgear
●It conforms to GB1207 and lEC60044-2 standards

China XUCKY Electric customized XUW2 Air Circuit Breaker, ACB (hereinafter referred to as circuit breaker) is suitable for distribution network with AC 50Hz, rated voltage to 660V (690V) and below, the rated current 630A-6300A, used to distribute power and protect line and power equipment from overload, undervoltage, short circuit, single-phase grounding and other faults.

China XUCKY Electric customized JDZX9-35 Type Voltage Transformer. There are three primary types of voltage transformers (VT): electromagnetic, capacitor, and optical. The electromagnetic voltage transformer is a wire-wound transformer. The capacitor voltage transformer uses a capacitance potential divider and is used at higher voltages due to a lower cost than an electromagnetic VT.