Products

China JN22-31.5 Series High Voltage Earthing Switch Manufacturer, Supplier, Factory

Always customer-oriented, and it's our ultimate target to be not only the most reliable, trustable and honest supplier, but also the partner for our customers for JN22-31.5 Series High Voltage Earthing Switch, JN22-40.5 Series Indoor HV Earthing Switch, JN22-1.5 Series Indoor HV Earthing Switch, JN22-40.5 Indoor AC High Voltage Disconnect Switch, JN22-31.5 Indoor AC High Voltage Disconnect Switch, We welcome all with the consumers and pals to call us for mutual positive aspects. Hope to do additional company along with you.
JN22-31.5 Series High Voltage Earthing Switch, Thus far, our item associated with printer dtg a4 may be shown in most foreign nations as well as urban centers, which are sought after simply by targeted traffic. We all highly imagine that now we have now the full capacity to present you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise:Csame top quality, better price; exact same selling price, higher quality.

Hot Products

  • JSZVR Type Voltage Transformer

    JSZVR Type Voltage Transformer

    JSZVR type voltage transformer of epoxy resin cast insulated and totally-enclosed structure is intended for power measurement, current monitoring and relay protection in the line of up to 12 kV and AC 50-60 Hz.
    ●It is applicable to air insulated switchgear
    ●It conforms to GB1207 and lEC60044-2 standards
  • PV SPD Surge Protective Device

    PV SPD Surge Protective Device

    XUCKY PV SPD surge protective device is applicable to the low-voltage standard IEC EN 50539-11, and is used to protect the DC system and other equipment from overvoltage and instantaneous overvoltage damage. When DC system experiences surge overvoltage due to lightning strikes or other reasons, the protector immediately conducts within nanosecond time, introducing surge overvoltage to the ground, thereby protecting the electrical equipment on the point network. DC surge protection device is a plug-in structure that can be quickly replaced after a module failure; After the lightning protection module fails, the color of the indicator window changes from green to red, and an alarm signal is sent to the remote alarm device connected to the remote signal terminal of the product.
  • ZW7-40.5 Series Outdoor High Voltage Vacuum Circuit Breaker

    ZW7-40.5 Series Outdoor High Voltage Vacuum Circuit Breaker

    ZW7-40.5 Series Outdoor High Voltage Vacuum Circuit Breaker is a 3-phase AC 50Hz 40.5kV outdoor switch equipment.
    ♦ Installation way: foundation installation;
    ♦ Operating mechanism: spring operating mechanism and electromagnetic operating mechanism;
    ♦ Pole material: silicone rubber, ceramic;
    ♦ Application: outdoor 33kV substation, power plant.
    ♦ Current transformer: in-buit installation, external installation.
  • FN7-24 Indoor HV Load Break Switch

    FN7-24 Indoor HV Load Break Switch

    High quality customized products FN7-24 Indoor HV Load Break Switch applies to three-phase powersupply system of rated voltage 12/24kV and AC 50/60Hz. it used to switch on and offload-breaking current and short-circuit current. lt is made as per lEC62271-105.
    Category: Switchgear & Medium Voltage LBS
    Brand:JGGY Electric
    Model: FN7-24R
    Power: 24KV/630A
    FOB Port: Ningbo/Shanghai
    Terms ofPyament: Western Union, T/T, Paypal
  • SPD Surge Protective Device

    SPD Surge Protective Device

    XUCKY SPD Surge protective Device, B, C, D series large current modular SPD Surge protective Device is used for power supply systems of AC 50/60Hz, the TT, IT, TN-S, TN-C, TN-C-S of rated voltage 380V and below, to protect the power grid caused by lightning or surge overvoltage. The design is based on the IEC61643-1, it can discharge the 100kA lightning current, case is installed on 35mm electric rail, the detachment device automatically will be out of its power grid, meanwhile the status indicator turns from green to red. SPD Surge protective Device has protection modes of common mode (MC) and differential mode (MD).
  • CJ20 AC Contactor

    CJ20 AC Contactor

    XUCKY Electric is CJ20 AC Contactor to Control Motors manufacturers and suppliers. CJ20 AC contactor (AC/DC contactor), mainly used in the circuit of AC 50Hz (or 60Hz), rated voltage to 660V, rated operating current to 630A, for long-distance making and breaking circuit, and combination with the appropriate thermal overload relay, to protect the circuit that operation may overload. AC/DC contactor meets standards of IEC60947-4-1, GB14048.4.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept