China JN22-31.5 Indoor AC High Voltage Disconnect Switch Manufacturer, Supplier, Factory

XUCKY Electric is CJ20 AC Contactor to Control Motors manufacturers and suppliers. CJ20 AC contactor (AC/DC contactor), mainly used in the circuit of AC 50Hz (or 60Hz), rated voltage to 660V, rated operating current to 630A, for long-distance making and breaking circuit, and combination with the appropriate thermal overload relay, to protect the circuit that operation may overload. AC/DC contactor meets standards of IEC60947-4-1, GB14048.4.

The XUCKY’s high quality RCBO C65 6kA type A 1P+N & 3P+N RCBO (Residual current operated circuit breaker with integral over-current protection ) is the perfect solution for a complete protection against over-current and earth fault currents. In two modules width (36mm) and four modules width(72mm) the series ensure,at any time and under any condition, the safety of people, facilities and related equipment

Support customized mass production DZ47-63 Miniature Circuit Breaker or called MCB is mainly used in the AC 50 / 60Hz, rated operating voltage of 230V / 400V and below, rated current of 63A circuit, the circuit breaker is mainly used in electrical wiring of modern buildings and overload, short circuit protection of equipment, also applies to infrequent operation and isolation of the line.

As the professional manufacture, XUCKY would like to provide you impulse relays. BIR series impulse relay coils are triggered by impulses and the contacts are closed. The product has two stable mechanical positions, and the contacts will open temporarily with the next impulse. Each received impulse will reverse the position of the contact and can be controlled by an unlimited number of buttons. And has the characteristics of zero power consumption. Impulse relay can be used to control the lighting circuit through the button. The circuit consists of incandescent lamps, halogen lamps, etc.

China XUCKY Electric customized LXK Current Transformer at 35kV and below. AC 50Hz line for the power system as well as the high voltage three-phase alternator, the motor's zero sequence over-current protection,and applies only to indoor. The outer diameter of the output cable is not greater than 120mm.
●This type of transformer is divided into two halves.Into a half circle type cast resin,and then clamping hoop connection.
●Installation can be mounted transformer is divided into two halves.Then merged into one,very easy to install.

The PV combiner box is a wiring device in the photovoltaic power generation system that ensures the orderly connection and confluence function of photovoltaic modules. This device can ensure that the photovoltaic system is easy to cut off the circuit during maintenance and inspection, and reduce the range of power outage in case of photovoltaic system failure. The combiner box means that the user can connect a certain number of photovoltaic cells with the same specification in series to form a photovoltaic tandem, and then connect several photovoltaic tandem to the photovoltaic combiner box in parallel. After converging in the photovoltaic combiner box, through the controller, DC distribution cabinet, Solar inverter, and AC distribution cabinet, a complete photovoltaic power generation system can be formed to achieve grid connection with the mains.