China ZW7-40.5 Series Outdoor High Voltage Vacuum Circuit Recloser Manufacturer, Supplier, Factory

XUCKY NDM1 Moulded Case Circuit Breaker (NDM1, hereinafter referred to as MCCB), is new circuit breakers which have been designed and developed by the company using international advanced technology. The circuit breakers are of the following characteristics: compact size, high breaking capacity, short arc-over distance and shakeproof, is ideal products applied on land or ships. The rated insulation voltage of the circuit breaker is 800V (500V for NDM1-63), it is suitable for the distribution network of AC 50Hz / 60Hz, rated working voltage of 690V and rated current of 1250A, to distribute power and protect circuit and power equipment from being damaged caused by overload , short-circuit, under-voltage and other fault. Also for protection infrequent conversion of the circuits and infrequent start of motor and overload, short circuit, under voltage.

XUCKY HR17B Fuse Switch Disconnector can be operated with load. It is applicable to rated current 40A~630A. There are 2 groups, 3 groups and 4 groups. It can be mounted on the busbar and installed on the fixed plate. It also provides the input and output structure of the upper and lower ends, knife-edge introduction and the arc extinguishing device; and the closed detection hole is on the switch cover, the signal switch and the detection switch are built. It can be equipped with fuse monitor and used as a knife switch.

China XUCKY Electric customized BCH8 Modular Contactor are new upgraded circuit breakers researched and developed by the company combined with the advantages of similar international products and demand of domestic and international markets.

RCBO ABDT-63 Circuit Breaker are intended for electric shock hazard protection in case of electric installation insulation failures, for preventing fires caused by earth current leakages, overload and short circuit protection.

The composite post insulator can be effectively used the narrow corridor to drive down the power supply, which is suitable for thetrans formation of the city network technology and high voltage power line service.
The composite post insulator has features of good hydrophobicity anti-ageing, anti-leakage trace and electric erode proof, tensile strength and bending strength, strong mechanical strength, shock resistance good quake proof and brittle failure proof, light weight. Easy to installation.

CJ12 AC Contactor is mainly used for electric equipment of metallurgy, electric power and hoister. It is suitable for the circuit of AC 50/60Hz, the voltage up to 380V, current up to 600A for remove making and breaking circuit, and frequency starting, stopping and inverse AC motor. The products comply with IEC60947-4.