China JDZXW-3.6.10 G Type Outdoor Voltage Transformer Manufacturer, Supplier, Factory

High quality customized products FN7-12 Series Indoor High Voltage Air Load Break Switch from China suppliers and manufacturers, XUCKY Electric have FN7-12DR type indoor AC off-voltage load break switch is applicable to AC 50Hz, rated voltage 12KV in the three-phase AC power system as a load current breaking and closing short-circuit current use, the combination of electrical appliances can open any current up to short-circuit current, can be used as protection.

China XUCKY Electric customized GW9-24 outdoor ac hv disconnect switch is single pole structure, which is used for opening or closing circuits under the voltage but no-load condition in 24kV outdoor electrical system. It has fixed draw hook and self-locking device, and effect operation with insulating hook-stick. Further more, Anti-pollution type switch can effectively solve flash due to pollution during the operation of disconnect switch so as to satisfy the requirement of users in badly polluted area.

XUCKY M3DC series DC MCCB for PV is a safety device specifically designed for photovoltaic (PV) systems to protect circuits from over current and short-circuit conditions, is suitable for DC grid circuit with rated voltage up to DC1500V and rated current of 800A, used to distribute electric energy and protect circuit and the power supply equipment is protected from the danger of overload, short circuit, etc.

ZN85-40.5 series indoor high voltage vacuum circuit breaker is a 3-phase AC 50Hz 40.5kV indoor switch equipment.
♦ Installation way: withdrawable type;
♦ Operating mechanism: spring operating mechanism;
♦ Pole type: assembled pole, embedded pole;
♦ Application: switchgear KYN61-40.5.
♦ Secondary plug: 58pins, 64pins.

The PV combiner box is a wiring device in the photovoltaic power generation system that ensures the orderly connection and confluence function of photovoltaic modules. This device can ensure that the photovoltaic system is easy to cut off the circuit during maintenance and inspection, and reduce the range of power outage in case of photovoltaic system failure. The combiner box means that the user can connect a certain number of photovoltaic cells with the same specification in series to form a photovoltaic tandem, and then connect several photovoltaic tandem to the photovoltaic combiner box in parallel. After converging in the photovoltaic combiner box, through the controller, DC distribution cabinet, Solar inverter, and AC distribution cabinet, a complete photovoltaic power generation system can be formed to achieve grid connection with the mains.

DPN RCBO should be connected using suitable conductors.