China 125 Amp Circuit Breaker Manufacturer, Supplier, Factory

XUCKY Electric brand's DZ50N-63 Miniature Circuit Breaker (10KA Miniature Circuit Breaker), mainly used for protection distribution lines of AC 50Hz/60Hz, rated voltage of 110V, 230V(220V), 400V (380V), rated current of 1A, 3A, 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 60A and 63A, rated short-circuit breaking capacity is 10KA or below, and used for the lines of not frequent making, breaking and conversion, with overload, short circuit protection. At the same time, the 10KA MCB has a strong auxiliary function modules, such as auxiliary contacts, indication contacts with alarm, shunt release, undervoltage release remote trip control and other modules. DZ50N-63 Miniature Circuit Breaker (10KA MCB) complies with standards of GB10963.1, IEC60898-1 standard.

High quality customized products FN7-12 Series Indoor High Voltage Air Load Break Switch from China suppliers and manufacturers, XUCKY Electric have FN7-12DR type indoor AC off-voltage load break switch is applicable to AC 50Hz, rated voltage 12KV in the three-phase AC power system as a load current breaking and closing short-circuit current use, the combination of electrical appliances can open any current up to short-circuit current, can be used as protection.

FLN36-12 Indoor High-voltage Sulfur Hexafluoride Load Switch is a medium-voltage switchgear developed by a professional manufacturer XUCKY. It is a multifunctional medium voltage switchgear that integrates switching, opening and grounding functions. It adopts a fully sealed, reinforced epoxy resin shell filled with 0.05MPa SF6 gas. Welcome to contact us!

XUCKY's AFDD-32 Series Arc Fault Protectors arc-protected type B + residual current operated circuit breaker (Af-rcbo-RRB- protects against arc, residual current, over-under voltage, overload transients, etc., it is recommended to use in the places with dense personnel and inflammable materials, such as home, school, nursing home, hotel, historic buildings and so on.

Q3 Automatic Transfer Switch (hereinafter referred to as ATS), it is suitable for the power supply system of AC 50Hz, rated voltag f 400V, rated current of 63A and below. Choice and conversion between two power supply according to the needs. ATS have protection functions of overload, short circuit, under-voltage, but also have functions of fire, double breaking and output closing signal. Particularly applicable to the lighting lines in office buildings, shopping malls, banks, high-rise buildings and other places with needs of the fire.

The PV combiner box is a wiring device in the photovoltaic power generation system that ensures the orderly connection and confluence function of photovoltaic modules. This device can ensure that the photovoltaic system is easy to cut off the circuit during maintenance and inspection, and reduce the range of power outage in case of photovoltaic system failure. The combiner box means that the user can connect a certain number of photovoltaic cells with the same specification in series to form a photovoltaic tandem, and then connect several photovoltaic tandem to the photovoltaic combiner box in parallel. After converging in the photovoltaic combiner box, through the controller, DC distribution cabinet, Solar inverter, and AC distribution cabinet, a complete photovoltaic power generation system can be formed to achieve grid connection with the mains.