China Plastic Empty Enclosure for MCB IP65 HT Series Waterproof Distribution Box Manufacturer, Supplier, Factory

XUCKY voltage protection device is an intelligent adjustable voltage and current protector. integrating overvoltage protection, undervoltage protection and overcurrent protection. Applicable to single-phase AC voltage 110V~240V, rated working frequency 50/60Hz, Maximum working current 63A. In case of over-voltage fault, under-voltage fault and over-current fault in the Live wire , this product can instantly cut off the power supply and protect the electrical equipment from burning. When the line returns to normal, the voltage protector can automatically reconnect the line. The overvoltage value, undervoltage value, overcurrent value and protection time of the product can be adjusted. It is mainly used for overvoltage/undervoltage protection of incoming lines of residential, photovoltaic and factory distribution boxes.

XUCKY CM1E Molded Case Circuit Breaker (hereinafter referred to as circuit breaker), the circuit breaker has small size, high breaking capacity, short arc, anti vibration. Its rated insulation voltage is 800V, suitable for the distribution network of AC 50Hz, rated voltage AC400V, rated current up to 1250A and below, used to distribute electrical energy and protect the circuit and power equipment from overload, short-circuit, undervoltage and other faults. It can also be used for the infrequent conversion of the line and the infrequent starting of the motor. The circuit breaker can be vertically installed, or horizontally installed. The low voltage circuit breaker has isolation function.

XUCKY PV SPD surge protective device is applicable to the low-voltage standard IEC EN 50539-11, and is used to protect the DC system and other equipment from overvoltage and instantaneous overvoltage damage. When DC system experiences surge overvoltage due to lightning strikes or other reasons, the protector immediately conducts within nanosecond time, introducing surge overvoltage to the ground, thereby protecting the electrical equipment on the point network. DC surge protection device is a plug-in structure that can be quickly replaced after a module failure; After the lightning protection module fails, the color of the indicator window changes from green to red, and an alarm signal is sent to the remote alarm device connected to the remote signal terminal of the product.

China XUCKY Electric customized JN17-50 combined grounding switch is a new design and improved product of us according to the ESI type, the structure is assembled, suitable with electric power system with 3-10KV, Three-phase, AC 501601Hz, support with various kinds of HV switchgear and earthing protection. It is complied with GB1985-2004 and IEC129 standard.

High quality FZN25-12 Series Indoor High Voltage Vacuum Load Break Switch from Chinese suppliers, XUCKY Electric specialized in Modular Electrical Terminal Equipment for many years. Our products have a good price advantage and cover most of the South America, Middle East, Africa, Southeast Asia markets. We look forward to becoming your long-term partner in China. FZN25-12 indoor HV vacuum load break switch a 3-phase AC 50Hz 12kV indoor switch equipment.

LZZBJ9-10 Type Current Transformer is one of the important electrical equipment in power system, it is similar to power transformer, is used to convert circuit voltage or current. However, the purpose of the power transformer switching voltage and current, is to transfer the power, voltage or current transformer transformation, the purpose of measuring and monitoring circuit voltage or current. In general, power transformer capacity is big, the change of the voltage or current error, transformer capacity is small the change of the voltage or current error is small. in the measuring circuit, which is used to convert current, the current meter and relay is called a current transformer, power transformer is used to convert voltage, the voltage meter and relay of power transformer is called voltage transformer.