Products

China LBS Manufacturer, Supplier, Factory

Our company insists all along the quality policy of "product good quality is base of enterprise survival; buyer fulfillment will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff" and also the consistent purpose of "reputation very first, shopper first" for LBS, Load Break Switch LBS, We're going to empower people by communicating and listening, Setting an example to others and learning from experience.
LBS, Based on our automatic production line, steady material purchase channel and quick subcontract systems have been built in mainland China to meet customer's wider and higher requirement in recent years. We have been looking forward to cooperating with more clients worldwide for common development and mutual benefit!Your trust and approval are the best reward for our efforts. Keeping honest, innovative and efficient, we sincerely expect that we can be business partners to create our brilliant future!

Hot Products

  • DZ47-63 Miniature Circuit Breaker

    DZ47-63 Miniature Circuit Breaker

    Support customized mass production DZ47-63 Miniature Circuit Breaker or called MCB is mainly used in the AC 50 / 60Hz, rated operating voltage of 230V / 400V and below, rated current of 63A circuit, the circuit breaker is mainly used in electrical wiring of modern buildings and overload, short circuit protection of equipment, also applies to infrequent operation and isolation of the line.
  • JN22-40.5 Series High Voltage Earthing Switch

    JN22-40.5 Series High Voltage Earthing Switch

    JN22-40.5 Series High Voltage Earthing Switch is an advanced level product with high tech parameters performance. After comprehensive evaluation, it conforms to GB1985 AC HV disconnect switch and earthing switch, applies to power system of 40.5kV and AC 50Hz. Can be used with KYN61-40.5 and other types high voltage switchgear, also play a protective role in the high-voltage electrical equipment overhaul.
  • AFDD

    AFDD

    The AFDD fault arc protector, hereinafter referred to as the protector, effectively detects the fault arc in the access line, including the fault parallel arc and the fault series arc. When it detects that there is a fault arc that causes a fire in the line, the outlet power-off function can be carried out to achieve the purpose of warning of the occurrence of a fire.
  • M11 Electronic Moulded Case Circuit Breaker

    M11 Electronic Moulded Case Circuit Breaker

    XUCKY Electric is large-scale M11 Electronic Moulded Case Circuit Breaker manufacturer and supplier in China. For many years, we have been specializing in Modular Electrical Terminal Equipment, our products have good price advantage and cover most of the European and American markets. We are looking forward to being your long-term partner in China.
  • JR20 Thermal Overload Relay

    JR20 Thermal Overload Relay

    China XUCKY Electric customized JR20 Thermal Overload Relays are suitable for circuits with AC 50Hz, voltages up to 660V, and currents up to 630A, to protect against overload, phase failure and three phase unbalance of AC motor.
  • HR17B Fuse Switch Disconnector

    HR17B Fuse Switch Disconnector

    XUCKY HR17B Fuse Switch Disconnector can be operated with load. It is applicable to rated current 40A~630A. There are 2 groups, 3 groups and 4 groups. It can be mounted on the busbar and installed on the fixed plate. It also provides the input and output structure of the upper and lower ends, knife-edge introduction and the arc extinguishing device; and the closed detection hole is on the switch cover, the signal switch and the detection switch are built. It can be equipped with fuse monitor and used as a knife switch.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept