China L3-63 ID Type Residual Current Circuit Breaker Manufacturer, Supplier, Factory

DPN RCBO should be connected using suitable conductors.

High quality customized products Drop type fuse cutouts are outdoor high voltage protection facilities. The fuse is installed at high voltage side of transformeror branch line of distribution line to protect transformer or transmission line from short circuit and overload,to break and connect load current.

XUCKY voltage protection device is an intelligent adjustable voltage and current protector. integrating overvoltage protection, undervoltage protection and overcurrent protection. Applicable to single-phase AC voltage 110V~240V, rated working frequency 50/60Hz, Maximum working current 63A. In case of over-voltage fault, under-voltage fault and over-current fault in the Live wire , this product can instantly cut off the power supply and protect the electrical equipment from burning. When the line returns to normal, the voltage protector can automatically reconnect the line. The overvoltage value, undervoltage value, overcurrent value and protection time of the product can be adjusted. It is mainly used for overvoltage/undervoltage protection of incoming lines of residential, photovoltaic and factory distribution boxes.

China XUCKY Electric customized KJ1 Series Switch And Socket may be a specific brand or model of electrical products used for power control and distribution in home, office or industrial environments. Such products usually follow certain electrical standards and safety specifications to ensure their safety and reliability during use.

3kv-36kv Zinc Oxide Lightning Arrester is a device to protect electrical equipment from overvoltage transients caused by external (lightning) or internal (switching) events. Also called a surge protection device (SPD) or transient voltage surge suppressor (TVSS), this class of device is used to protect equipment in power transmission and distribution systems. (For consumer equipment protection, different products called surge protectors are used.) The energy criterion for various insulation material can be compared by impulse ratio, the surge arrester should have a low impulse ratio, so that a surge incident on the surge arrester may be bypassed, to the ground instead of passing through the apparatus.

Wholesale LR9 thermal overload relay manufacturer, 32A/690V, thermal setting range 6.4-32A, selectable tripping class 5-10-20-30, for protection of 3-phase motors 3-15KW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, buttons for test, stop and reset as well as manual-automatic reset selector, dipswitches for tripping class selection, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. With a large thermal setting range 6.4-32A, a selectable tripping class 5-10-20-30 and phase unbalance detection, it protects motors 3 to 11KW@400V. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D09-D38. Mounting on DIN rail or screw fixing, separated from contactor, with use of the terminal block LAD7B205 (to be ordered separately). Multi-standards certified (IEC, UL, CSA, CCC), Green Premium compliant (RoHs/Reach).