China Fault Arc Protector Manufacturer, Supplier, Factory

DPN RCBO should be connected using suitable conductors.

VSG-24 series indoor high voltage vacuum circuit breaker is a 3-phase AC 50Hz 24kV indoor switch equipment
♦ Operating mechanism: spring operating mechanism;
♦ Pole type: assembled pole: embedded pole;
♦ phase-to-phase distance: 275mm;

XUCKY Electric brand's VEF-12GD Side Installation Type 3 Working Position Vacuum Circuit Breaker Integrated, side installation, with disconnect switch, with earth switch (upper/lower earthing), interlocking mechanism integrated miniaturized
● 12KV, 630~1250A, 20~31.5KA
● For cabinet width 500mm
● Patented technology
● Solid sealing technology
● Outgoing terminal with non-contact charged display sensor
● The cabinet door block adjustment free

XUCKY NDM1 Moulded Case Circuit Breaker (NDM1, hereinafter referred to as MCCB), is new circuit breakers which have been designed and developed by the company using international advanced technology. The circuit breakers are of the following characteristics: compact size, high breaking capacity, short arc-over distance and shakeproof, is ideal products applied on land or ships. The rated insulation voltage of the circuit breaker is 800V (500V for NDM1-63), it is suitable for the distribution network of AC 50Hz / 60Hz, rated working voltage of 690V and rated current of 1250A, to distribute power and protect circuit and power equipment from being damaged caused by overload , short-circuit, under-voltage and other fault. Also for protection infrequent conversion of the circuits and infrequent start of motor and overload, short circuit, under voltage.

XUCKY Electric is a leading China manufacturer and exporter specializing in VSG-12 Series Indoor High Voltage Vacuum Circuit Breaker. We have a wide range of products to meet the different needs of our customers worldwide. Our commitment to superior quality, innovative technology and excellent customer service makes us stand out in our industry.

XUCKY Electric brand’s Drop-Out Arresters is a modified zinc oxide lightning arrester that is cleverly installed on the drop type mechanism of the drop type fuse. It can be easily tested, repaired, and replaced with the help of an insulation pull lever under continuous power supply. This not only ensures the smooth operation of the line, but also greatly reduces the work intensity and time of power maintenance personnel, Especially suitable for places that are not suitable for power outages, such as communication, airports, stations, hospitals, bustling commercial areas, etc. The other performance of the product is the same as that of the distribution type lightning arrester.