China ACB Manufacturer, Supplier, Factory

XUCKY Electric brand's FN12-12 series indoor high voltage air load break switch is a 3-phase AC 50Hz 12kV indoor switch equipment.
♦ Installation way: front-mounted, side mounted, flip mounted;
♦ Operating mechanism: spring operating mechanism, manual type and electrical type available;
♦ Operation type: right operation and left operation;
♦ Application: indoor 12kv switchgear.

DPN RCBO should be connected using suitable conductors.

XUCKY Electric is a large-scale CJX2 Contactor manufacturer and supplier in China. CJX2 Contactor (LC1) (AC/DC contactor, hereinafter referred to as contactor), mainly used for the circuit of AC 50Hz (or 60Hz), the voltage to 660V, the rated operating current to 95A in the utilization category of AC-3, 400V (380V), for the remote on and off circuit, frequent start and control AC motor, and combine with the appropriate thermal relay to form electromagnetic starter to protect the circuit may occur overload operation.

FLN36-12 Indoor High-voltage Sulfur Hexafluoride Load Switch is a medium-voltage switchgear developed by a professional manufacturer XUCKY. It is a multifunctional medium voltage switchgear that integrates switching, opening and grounding functions. It adopts a fully sealed, reinforced epoxy resin shell filled with 0.05MPa SF6 gas. Welcome to contact us!

XUCKY PV SPD surge protective device is applicable to the low-voltage standard IEC EN 50539-11, and is used to protect the DC system and other equipment from overvoltage and instantaneous overvoltage damage. When DC system experiences surge overvoltage due to lightning strikes or other reasons, the protector immediately conducts within nanosecond time, introducing surge overvoltage to the ground, thereby protecting the electrical equipment on the point network. DC surge protection device is a plug-in structure that can be quickly replaced after a module failure; After the lightning protection module fails, the color of the indicator window changes from green to red, and an alarm signal is sent to the remote alarm device connected to the remote signal terminal of the product.

PV-30 1000VDC Solar PV Fuse Link (φ10.3x38)mm